NAD C368 Hybrid Digital Dac Amplifier (Used)

Hybrid Digital DAC Amplifier

With the C 368 Hybrid Digital DAC Amplifier, your home audio system will never fall behind the pack. Thanks to our MDC technology, the C 368 is easily customisable and ready for all future features and upgrades. With the optional BluOS® module, the C 368 can connect to your network and be controlled through a smartphone, tablet, or desktop, and connect wirelessly to any other BluOS Enabled device to create a multi-room High Resolution Audio system. You can also instantly connect to the C 368 through Bluetooth, giving you the ability to stream wirelessly from any Bluetooth Enabled device, and if you’re a vinyl fan, you can also add a turntable. Enjoying music has never been so easy. A totally modern approach to amplification, the C 368 is the ultimate amp for any music lover’s system.

Key Features

80W x 2 Continuous power into 8 or 4 Ohms

Bluetooth A2DP with aptX supported

MM Phono input

Analogue line inputs

SPDIF coax and optical inputs

Speaker A, Speaker B

Stereo or Bridge mode configuration

Preamp/Subwoofer out

Headphone amplifier

MDC Slots for future upgrades

IR Remote

Smartphone Control App

12V Trigger in/out

IR in/out

RS-232 Serial port for control

Control4, Crestron, RTI, URC, AMX, Savant, Elan certified

Preamplifier

Line Input, Pre Out

THD (20Hz-20kHz)

<0.005% at 2V out

Signal/Noise Ratio

>106dB (IHF; A-weighted, ref. 500mV out, unity gain)

Channel Separation

>80dB (1kHz); >70dB (10kHz)

Input Impedance (R and C)

22 kilohm + 100pF

Maximum Input Signal

>4.5Vrms (ref. 0.1% THD)

Output Impedance

Source Z + 240 Ohm

Input Sensitivity

93mV (ref. 500mV out, Volume maximum)

Frequency Response

±0.03dB (20Hz-20kHz)

Maximum voltage output – IHF load

>4.5V (ref. 0.1% THD)

Tone Controls

Treble: ±7.0dB at 20kHz

Bass: ±7.0dB at 60Hz

Balance: -10dB

Phono Input, Pre Out

THD (20Hz-20kHz)

<0.01% at 2V out

Signal to Noise Ratio

>84dB (200 Ohm source; A-weighted, ref. 500mV out)

>76dB (MM cartridge source, IHF; A-weighted, ref. 500mV out)

Input Sensitivity

1.44mV (ref. 500mV out, Volume maximum)

Frequency Response

±0.3dB (20Hz-20kHz)

Maximum Input Signal at 1kHz

>80mVrms (ref. 0.1% THD)

Line Input, Headphone Out

THD (20Hz-20kHz)

<0.005% at 1V out

Signal/Noise Ratio

>110dB (32 Ohm loads; A-weighted, ref. 2V out, unity gain)

Frequency Response

±0.3dB (20Hz-20kHz)

Channel Separation

>60dB at 1kHz

Output Impedance

6 Ohms

General Specifications

Continuous Output Power into 4 Ohms and 8 Ohms (Stereo)

>80W (ref. 20-20kHz at rated THD, both channels driven)

Continuous Output Power into 8 Ohms (Bridge Mode)

300W (at 20-20kHz at THD 0.03%)

THD (20Hz-20kHz)

<0.03% (250mW to 80W, 8 Ohms and 4 Ohms)

Signal to Noise Ratio

>98dB (A-weighted, 500mV input, ref. 1W out in 8 Ohms)

Clipping Power

>95W (at 1kHz 0.1% THD)

Clipping Power (Bridge Mode)

>315W (at 1kHz 0.1% THD)

IHF Dynamic Power

8 Ohms 120W

4 Ohms 200W

2 Ohms 250W

IHF Dynamic Power (Bridge Mode)

8 Ohms 500W

4 Ohms 560W

Peak Output Current

>20A (in 1 Ohm, 1ms)

Damping Factor

>300 (ref. 8 Ohms, 20Hz and 6.5kHz)

Frequency Response

±0.3dB (20Hz-20kHz)

Channel Separation

>75dB (1kHz)

>70dB (10kHz)

Input Sensitivity (for 80W in 8 Ohms)

Line In: 470mV; Digital In: 21% FS

Sample Rate

up to 24 bit/192kHz

Frequency Band

2.402G-2.480G

Maximum Transmit Power (dBm)

7dBm ±2dBm

Power Consumption

at Auto Standby ON and Network Standby OFF

0.5 Watts*

at Auto Standby ON and Network Standby ON

1.2 Watts**

OFF mode (Power switched OFF)

0.1 Watts

Weight & Dimensions

Gross Dimensions (W x H x D)*

435 x 100 x 390mm (17 1/8 x 3 15/16 x 15 3/8)”

Net Weight

7.8kg (17.2lb)