Rega FONO MM Display Unit

Home/Display Unit/Rega FONO MM Display Unit

Rega FONO MM Display Unit

RM 1,090.00

More information : Visit Us at :

CHOY Audio Visual
519, Jalan Pasir Puteh, 31650 Ipoh, Perak
Whatsapp: Choy 012-5685484
SKU: FONO MMR Category: Tag:


specifications /
Input sensitivity = 1.7mV for 200mV


Input loading = 47KΩ in parallel with 100pF

Maximum input level = 60mV at 1KHz

Gain = 41.4dB at 1KHz

Output impedance = 200Ω

Recommended minimum output load resistance = 5KΩ

Frequency response (50KΩ output load) = 15Hz (-3dB) to 100KHz (-0.2dB)

RIAA accuracy (50KΩ output load) = better than +/-0.2dB 100Hz to 100KHz

Power requirements = 24V AC at 80mA maximum. Only to be used with Rega PS1


introduction /

The Fono MM has been designed to be effective, easy to use, and above all, to reproduce music. The Fono MM uses a fully discrete, cascaded, complementary amplifier input stage. This configuration has been proven to work well with moving magnet cartridges. The RIAA equalization has been split into two stages to minimise interaction. Polyester capacitors have been used in the signal path and polypropylene capacitors are used in the RIAA equalization circuits.

The aesthetic design of the Fono MM was as important as the quality of its electrical capabilities, so it benefits from the same aluminium case as the Rega TTPSU and Fono MC amplifier, giving it a design which offers a familiar feel and moreover brings it in line with its illustrious bigger brothers.

The Fono disk stage is designed to amplify the signal from a moving magnet cartridge to a level which can feed into a 200mV line level input on a standard hi-fi amplifier.

powering up /
The Fono MM is turned on by pressing the on-off button located on the front, when

the unit is active the Rega logo will glow RED.


Go to Top