RM 14,500.00
Note :
Get it with 0% Credit Card Instalment Plan Up to 18 months
Maybank , Public Bank, CIMB Bank Credit Card Instalment Plan up to 18 months – Lazada / Shopee
AFFIN, Ambank, Citibank, HSBC, OCBC , RHB Credit Card Instalment Plan Up to 12 months (CAV)
IsoTek’s EVO3 Genesis One is a highly compact state of the art full sine wave generation system, taking technology from IsoTek’s Ultimate Series Genesis.
This product is dedicated to powering front-end components up to a maximum of 100W from a single rear outlet. As most source components are under 50W in power consumption, it is possible to use this product in combination with IsoTek’s EVO3 Gemini power bar. Genesis One is compact measuring 75mm in width, 470mm deep and 125mm high housed in an extruded and machined aluminum chassis. At the rear is a single independent high current output socket designed to drive source components, CD players, DAC, pre-amplifiers and turntable motors. There is also an Auxiliary connection point for adding and powering additional IsoTek power cleaners. For example, a total of six Titan One, Nova One or Genesis One products can be positioned side by side to create a rack width unit.
The internal wiring is of the highest standard; ultra pure Ohno Continuous Cast copper solid core conductor strands with silver-plating offers low resistance and high amperage. A Fluorinated Ethylene Propylene (FEP) helix is wound around the conductor before an extruded FEP dielectric protects the conductor and creates a Virtual Dielectric of Air (VDA). This construction gives unrivalled performance and gives the ultimate low resistance, high performance internal power delivery system.
The internal wiring of IsoTek products synergizes with the range of IsoTek power cables. One critical but overlooked area is maintaining commonality of design and material properties though an audio wiring loom, be it signal carrying cables or your power cable network.
| NUMBER OF OUTLETS | 1 + System Link |
| OUTLETS (SINE WAVE GENERATION) | 100W |
| THD | 0.03% |
| VOLTAGE STABALISATION | 230V or 115V +/- 1% |
| MAINS INLET | 10A IEC C14 |
| MAINS VOLTAGE | 100 to 240V depending upon model |
| MAINS FREQUENCY | 50 to 60Hz depending upon model |
| SYSTEM LINK | x1 |
| DIMENSIONS (W X H X D) | 75 x 125 x 470mm |
| WEIGHT | 10Kg |
EVO3 Premier was inspired by discussions with high-end electronics companies, many of whom produce audio equipment that retails for tens of thousands of pounds and yet is bundled with poor quality power cords that significantly constrain performance.
Premier delivers excellent performance, and also represents outstanding value-for-money. No compromise has been made in relation to the quality of parts and materials used in its construction.
FEATURES
CONSTRUCTION:
The conductors are in a parallel construction with a slight rotational twist. This established technique remains the first line of defence against RFI and EMI rejection.
A) Conductors:
Silver plated 99.9999% OFC conductors offer an exceptional level of purity with enhanced conductivity. They are less likely to fracture (compared to solid core) or degrade over time. Silver is an excellent conductor and when combined with a high purity copper provides impressive electrical properties.
B) Dielectric:
Teflon FEP (Fluorinated Ethylene Propylene) dielectric (insulation) is chemically inert and has a very low dielectric constant over a wide frequency range. FEP possesses a very high degree of stress crack resistance and a low coefficient of friction making it an exceptional dielectric. FEP is the first choice for safety in both temperature and electrical insulation.
C) Filler:
Cotton filler has been used to give the cable internal strength and reduce microphony. Cotton also possesses excellent dielectric properties, the best of a solid material.
D) Wrap:
A paper wrap is used to secure the construction prior to the application of a flexible PVC jacket. The addition of the paper and cotton form a buffer with the PVC so as to maintain exceptional dielectric properties.
E) Jacket:
PVC is used as the outer jacket to give a high degree of flexibility and mechanical strength.
TERMINATION:
Premier cable is terminated using IsoTek’s bespoke Audiophile grade moulded connectors of solid OFC with 24ct gold plated conductors. These offer the highest quality performance and are less prone to tarnish.
| CONDUCTOR SIZE | 3 x 2.0sqmm |
| CONDUCTOR MATERIAL | Silver-plated 99.9999% Oxygen Free Copper |
| DIELECTRIC | Fluorinated Ethylene Propylene (FEP) |
| DIELECTRIC CONSTANCE | 2.1 |
| FILLER | Cotton |
| PVC BARRIER | Paper |
| OUTER JACKET | High flexibility PVC |
| CABLE POWER RATING | 16 Amp |
| CABLE LENGTH | 1.5m standard (no custom length) |
| OUTER DIAMETER | 10mm |
| TERMINATION | 24ct gold plated audiophile-grade connectors |
| MODEL | UK + PREMIER C19 BLACK, US + PREMIER C19 BLACK, UK + PREMIER C19 SILVER, US + PREMIER C19 SILVER |
|---|
