RM 8,208.00
The air-helix construction of the Reference Digital-2404 is wholly unique. We have developed a special clip to ensure air insulation that is as close to perfection as possible. A large number of these clips form the supporting structure on the inside of the cable. This holds the signal conductor free in the air in a helix form and guides it through the shielding at defi ned intervals. The fl exibility of this construction is attained with two bridges that hold the clips together evenly and at exact intervals. With coaxial cables, the shielding is usually used as an earth conductor. The Reference Digital 2404 RCA on the other hand has a double-symmetric structure and has two positive and two negative conductors. This means that the shielding is completely separate and the signal remains free of interference. It may seem paradoxical but thanks to this highly innovative air-insulation design, enjoying hi-fi sound becomes a virtually breathtaking experience.
Reference Digital-2404 的空气螺旋结构是独一无二的。 我们开发了一种特殊的夹子，以确保尽可能接近完美的空气绝缘。 大量这些夹子形成了电缆内部的支撑结构。 这将信号导体以螺旋形式保持在空气中，并以定义的间隔引导它通过屏蔽。 这种结构的灵活性是通过两个桥来实现的，这些桥将夹子以精确的间隔均匀地固定在一起。 对于同轴电缆，屏蔽层通常用作接地导体。 另一方面，Reference Digital 2404 RCA 具有双对称结构，具有两个正导体和两个负导体。 这意味着屏蔽是完全独立的，信号保持不受干扰。 这似乎有些矛盾，但由于这种高度创新的空气绝缘设计，享受高保真音效几乎成为一种令人惊叹的体验。
When it comes to high-end applications, air is still the best insulator currently available as it achieves low capacities and low losses. With NF and Digital cables (fitted with RCA or XLR plugs), these factors are critical for creating an exceptional connection. But consistent design is equally important: The precisely defined distance between the conductors and the shield must be maintained at all times. Flexibility is another key challenge – the cable must allow for conveniently running it behind your hi-fi equipment or rack. Just like all loudspeaker and audio cables from the Referenz series, the Digital 2404 is entirely made in Germany. The clips are meticulously assembled by hand at the on-site factory and then threaded into the Super Speed waveguide. The resulting Air Helix is then provided with a shield and the PE network jacket and finally fitted with GAP-RCA-II or XLR plugs.
空气螺旋设计
在高端应用方面，空气仍然是目前可用的最佳绝缘体，因为它具有低容量和低损耗的特点。 对于 NF 和数字电缆（配有 RCA 或 XLR 插头），这些因素对于创建出色的连接至关重要。 但一致的设计同样重要：必须始终保持导体和屏蔽之间精确定义的距离。 灵活性是另一个关键挑战——电缆必须允许在您的高保真设备或机架后面方便地运行。 与 Referenz 系列的所有扬声器和音频电缆一样，Digital 2404 完全在德国制造。 夹子在现场工厂手工精心组装，然后穿入超高速波导。 然后为最终的 Air Helix 提供屏蔽和 PE 网络护套，最后安装 GAP-RCA-II 或 XLR 插头。
Obviously, the conductors themselves play a key role, too. For the Digital-2404, they are made of 32 high-purity copper wires braided around a PE core. A very thin lacquer coating on the wires prevents the formation of eddy currents inside this Super Speed waveguide.
超速导体
显然，指挥本身也起着关键作用。 对于 Digital-2404，它们由 32 根高纯度铜线围绕 PE 芯编织而成。 导线上的非常薄的漆涂层可防止在此超高速波导内形成涡流。
We have long set the bar very high in regard to quality, because cables and connections are extremely sensitive. Physical phenomena that arise during the transmission of signals can only be controlled with technical finesse and the best materials. For this reason all cables are manufactured in a German cable mill and finished by us in Ballrechten-Dottingen in elaborate manual work.
IN-AKUSTIK 手工制作
我们长期以来一直在质量方面设定很高的标准，因为电缆和连接非常敏感。 信号传输过程中出现的物理现象只能通过技术精湛和最好的材料来控制。 出于这个原因，所有电缆都在德国电缆厂制造，并由我们在 Ballrechten-Dottingen 精心手工加工完成。
特征
